BOXLIGHT Pro4500dp Manuel d'utilisateur télécharger pdf (Page 51)

—

’

LED Error Messages

LED STATUS/

NUMBER OF FLASHES

DESCRIPTION

2 I

C bus error

3 System over temperature

4 System I

C interface error

5 Lamp error

6 Fan error

Power

8 DLP Driver error

1 Power & Ballast fan

2 Blower fan (Lamp 2, Right)

3 Blower fan (Lamp 1, Left)

4 Outlet fan (Lamp 2, Right)

5 Blower fan (Rod)

6 Outlet fan (Lamp 1, Left)

7 PC board fan

8 Blower fan (DMD)

Temperature

Valid only

when fan

error

9 Blower fan (DMD

Image Problems

Problem: No image appears on the screen

1. Verify the settings on your notebook or desktop PC.

2. Turn off all equipment and power up again in the correct order.

Problem: The image is blurred

1. Adjust the Focus on the projector.

2. Press the Auto button on the remote control or projector.

3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.

4. Check that the projector lens is clean.

Problem: The image is wider at the top or bottom (trapezoid effect)

1. Position the projector so it is as perpendicular to the screen as possible.

2. Use the Keystone button on the remote control or projector to correct the problem.

Problem: The image is reversed or upside down

Check the Projection setting on the Utility menu of the OSD.

– 44 –

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 60 61

Commentaires sur ces manuels

Pas de commentaire

BOXLIGHT Pro4500dp Manuel d'utilisateur Page 51

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs BOXLIGHT Pro4500dp